8 kinds of stone surface smooth treatment methods

Polishing: High gloss on the surface.Polishing may last for a long time may not, mainly to see the type of stone.Granite, marble, and limestone are usually polished and require different maintenance to maintain their luster.

Polishing: The finished surface looks "soft", scratches are obvious, and does not require much care.Marble, limestone, and SLATE are suitable for finishing.

Acid pickling: small corrosion marks on the surface.The pickling surface scratches less, the appearance is more plain than the polished surface.Most stones can be pickled, but the most common are marble and limestone.Pickling is also a method of softening the luster of granite.

Cutting axe: surface is not smooth.After the initial cutting, the stone was further processed to eliminate the obvious saw marks, but the effect was not as good as that of the polished stone.Granite, marble, and limestone can be treated in this way, usually to order.

Fire: Rough surface.This kind of surface is mainly used in interior such as floor or as the finish of commercial building, labor cost is high.It is heated at high temperatures and then cooled quickly to form a fire surface.The fire surface is usually granite.

Cracking: rough surface, but not as rough as fire.This surface treatment is usually cut by hand or in the mine chisel to expose the stone natural cracking surface.This surface treatment is mainly applied to SLATE.

Roll: the surface is smooth or slightly rough, and the corners are smooth and broken.There are several ways to achieve the roll effect.A 20mm brick can be rolled in the machine, and a 3cm brick can be rolled and then split into two bricks.Marble and limestone are the preferred materials for rolling treatments.

Scrub: Old surface.The process is to scrub the surface of the stone, mimicking the natural wear effect of the stone.