Advantages of stone composite board
Mar 23, 2021
Light weight: the thinest marble composite plate can only be 5mm thick (and aluminum plastic plate composite).The commonly used composite tile or granite is only about 12mm thick, which saves a lot of cost in transportation and is the best choice when there is a load limit on the building.
High strength: after marble and ceramic tile, granite, aluminum honeycomb board, etc., its bending, bending and shear strength has been significantly improved, greatly reducing the damage rate in the process of transportation, installation and use.
Anti-pollution ability to improve: ordinary marble original board (whole body board) in the installation process or later in the use of the process, such as wet cement paste, is likely to be half a year or a year later, the marble surface appears a variety of different discoloration and stains, very difficult to remove.Composite plate because of its bottom more hard and compact, while there is a thin layer of adhesive layer, to avoid this situation.
It is easier to control color difference: because the marble composite plate is the original board of 1M2 (whole body board) cut into 3 or 4 pieces into 3M2 or 4M2, and its pattern and color are almost 100% the same as the original plate, so it is easier to ensure the use of large area.
Easy installation: due to the above characteristics, in the installation process, no matter the weight, easy to break (strength, etc.) or color splicing are greatly improved installation efficiency and safety, but also reduce the installation cost.
Break through the forbidden area: the decorative part of marble, no matter inside and outside walls, ground, windowsill, porch, table top and so on, the ordinary original board (whole body board) does not exist a problem, only the ceiling whether it is marble or granite, any decoration company dare not and can not take this risk.And the composite plate after marble and aluminum plastic plate, aluminum honeycomb bonding broke through the forbidden area of this stone decoration.Because it is very light, it only weighs 1/5 to 1/10 of the weight of the whole board.If you want to decorate the ceiling with stone, it is the best.
Sound insulation, moistureproof: aluminum honeycomb board and marble composite board, because of the equi-sided hexagonal hollow aluminum bee core made of sound insulation, moisture, heat insulation, cold resistance performance.Accordingly, these characteristics went far beyond the performance characteristic that place of whole body board does not have.
Energy saving and consumption reduction: stone aluminum honeycomb composite panel has the performance of sound insulation, moisture proof and heat preservation, so it can greatly reduce the consumption of electric energy and heat energy after indoor and outdoor installation.
Reduce the cost: because the stone composite material is thinner and lighter, it saves a part of the cost on the transportation and installation, and for the more expensive stone material varieties, after making composite board, the finished board price is lower than the original board to different degrees.
Marble composite board has both the performance characteristics of natural stone and the performance comparative advantage in practice, which also determines the sustainable development trend of its future market.More and more countries and regions in the international market are widely used, but also verified the market development trend of marble composite board.
