Are You Supposed To Seal Marble

Are You Supposed To Seal Marble Floor And Your Countertops, How To Seal Them?

In the wet paste natural stone ground, be sure to first do the stone "six surface with waterproof treatment", control the stone inhalation cement alkali water, resulting in alkali phenomenon affects the beauty of the stone to prevent the stone due to alkali and cause "panda eyes" phenomenon. Stone in the construction of professional waterproofing treatment, so that it is not contaminated by the outside world, has been maintained bright as a new effect.

Overall sealing marble is a must, and not too daunting of a task, but it is something that is not a one-and-done job. After installation, it is good practice to seal marble every twelve months depending on use levels using a neutral pH breathable sealer product.

If sealing the marble is a DIY project at home it is basically the same job as painting walls or staining wood. The only difference here is the product bought, in this case, is a sealer.

Before applying the sealer make sure to thoroughly spray the area using a mild pH-neutral cleanser or commercial stone cleanser. Once sprayed you’ll want to wipe the marble tile with a damp cloth to clean it and then use a dry cloth to dry the area thoroughly.

From there you’ll want to apply a good layer of sealer making sure to get the stone wet. Let the sealer soak for 15 minutes and then buff it out with a dry cloth. Let the stone completely dry for 1 hour.

After 1 hour repeat the process with the application of the second coat of sealer. After a max of 15 minutes wipe the sealer off. Make sure not to walk on the marble floors for at least 40 minutes after applying the sealer.