For stone transportation, these 2 points must be done well

Everyone in the stone circle knows that the transportation cost of stone is extremely expensive. Therefore, in the process of stone transportation, we are doing our best to reduce loss and damage to maintain the quality of the stone. Natural stone, as a high-end building decoration material, needs to pay attention to some characteristics of the stone itself during transportation.

  The most common methods of stone transportation commonly used are: road transportation, water transportation, and rail transportation. When choosing transportation methods, we should try our best to understand and compare the characteristics of different transportation methods.

  In the process of loading and unloading and transportation of stone, a series of accidents such as car damage, casualties and stone damage will be caused due to lack of experience and carelessness. Therefore, you must be prepared when transporting stone. These preparations are all to ensure safety and preparedness.

  According to different conditions during transportation, such as the size of the specification, the distance of the distance, the quality of the stone, and the method of transportation, make the following preparations:

1. Preparation for handling

  1. The white and easily polluted stone cannot be tied with straw rope

  2, the stone must have shielding tools during long-distance transportation to prevent exposure to sunlight, rain and wind

  3, precious and small-size finished products, protect the acute angle, and pack it in a carton or wooden box

  4. Large size plates are firmly nailed with fresh wood squares

  5. If there is pollution, clean it; the floor where the stone is placed should be hard and flat to prevent ground collapse, tilting of the iron frame, collapse of the stone, and breakage

  6, the slats can be bundled with iron wire and wooden slats

  7. No load loss, no overload, insurance procedures must be completed if conditions permit, and there must be no chance of luck

  8, the transport wagon or cabin should be kept clean, and there should be no contaminated places

2. Precautions for transportation

  1. When stone is transported remotely, such as trucks, ships, etc. If the tonnage is large, it can be divided into sealed containers, containers or open-air archways. When the running speed is fast, because of the large inertia, the stone cannot be arranged horizontally when hanging and should be erected along the running direction to reduce loss.

  2. Automobile transportation is the most common, and accidents are the most common, so choose a good car and never let a sick car go on the road. It must be loaded according to the product. When loading, the smooth and thick boards should be placed in front or on the bottom layer. The finished product or thin plate is placed on the upper layer or behind, and each layer should be separated by wooden strips to reduce the corners and wear. Separate loading of people and goods, and it is strictly forbidden for people to ride on vehicles carrying stones.