How to fill the stone cylinder?

Today, for the stone craft, style is also emerging in an endless stream, there are large area of parquet, there are cylindrical balls, rich in color, different forms.And the subsequent problem is to fill the glue.Today Xiaobian to introduce to you about the marble cylinder production process of glue.

In the production process of stone cylinder, filling glue is a very professional technology, which is very important to the quality of the product.

The method steps can be divided into several items:

step 1

The original marble cracks in the mortar or other debris picked out, deep 3-5mm, if the stone, the width of the gap to increase to about 10mm, if it is marble, the original seam can be cleaned up.

step 2

Smash the marble close to the color and pattern of the crack with a small hammer.If it is flax stone, its particle size is appropriate to be similar to the size of flax stone, if it is monochromatic stone, smashed into powder.

step 3

Take the right amount of transparent marble glue and broken marble particles or powder stirring, add the right amount of drier, and then stir evenly, will stir the mixture evenly coated in the crack, crack after coating is slightly higher than the marble surface 0.5mm is appropriate, later that is dry.

step 4

Angular polishing machine installation, 100 resin sand, grinding dry crack mouth slightly flat, then install 220 resin film fine grinding, and then with 360 waterproof abrasive paper after polishing, the metope and ground water damage and clean up dirt and stains, then use angular polishing machine installation cloth round of polishing and waxing polishing, after waiting for appear luster to continue polishing, until with the original marble luster near,Dip in with steel wire cotton next a few polishing wax, manual polishing, until burnish is identical with former marble completely, at this moment, crack does not look to go out.

Step 5

If there is a pattern in monochromatic stone, its pattern is just in the crack, in addition to mixing powder with glue, but also the application of color powder matched with the pattern of the color, embedded in the seam.