How to isolate wet and dry toilets?

All separated from

This kind of plan applies to the toilet of 6 square metre above.

It takes the form of a separate wall separating the bathtub and shower from the bathroom.It is to shower wet area normally, put in toilet inside isolate, will divide for dry wet two parts.

▲ To achieve dry and wet separation by closing the shower with glass partition wall.

▲ To wall isolation out of the shower area.

▲ Or wall isolation, the toilet and washing machine into the wet area, separate isolation basin as dry area.

Half separated from

Use shower room to do half to isolate normally, shower room is cent is complete enclosed and half enclosed.

1. Fully enclosed shower room, general requirements of the toilet area to reach 5 square meters above.

▲ Fully enclosed shower room from the manufacturer, after paving the floor tile directly installed.Shower room built-in ventilation, can ensure the dry area dry.

2. If the bathroom size is insufficient, it is recommended to use a semi-enclosed shower room.

▲ Semi-enclosed shower room by water bar, partition glass, aluminum alloy frame.Some also have wooden or concrete bases.Semi-enclosed shower room, there will still be water vapor leakage, not as good as the whole partition of dry and wet partition, and the shower room closed.

The shower curtain

Shower curtain suits the toilet of small space especially, relatively beautiful and practical.Actually, bath shade also is one of wet area half partition

▲ It is composed of water-retaining strip, shower curtain and shower curtain track, which is convenient and light, and the partition effect is almost the same with semi-enclosed shower room.