How to maintain stone fire board?

Stone as a high-grade decorative materials used in the decoration of the building surface, the maintenance and maintenance of stone is increasingly urgent and important.Stone renovation process, the fire board with spray flame burn evenly on the surface to move, move speed is 120 ~ 250 mm per second, spray gun and the distance from the plate mouth is 20 ~ 40 mm, and each other into Angle, the flame temperature of 800 ~ 1000 ℃, flame burner to spray water on board before (prevent flame burner burning plate, the water is heated evaporation heat).Make it fall off 0.5~1 mm of surface layer.The granite material processed by this method exposed the nature of the stone, with simple, rough, natural sense is strong.Then use the stone anti-fouling and anti-seepage treatment method of stone maintenance and protection.Here's how:

Stone antifouling seepage prevention is to use strong osmosis anti-seepage agents, not in the surface film, seeping into the internal pores, nanoscale spherical crystalline curing layer formation, which can prevent a variety of water pollutants from entering the well, and can not affect the color of stone material and air permeability, avoids the internal moisture retention caused by stone lesions;Dust and pollution can only float on the surface of the stone, easy to clean.Waterproof and antifouling protectant has strong penetration and plays a maintenance and protection role on the building stone surface.

1, will not change the performance and color of the stone surface;

2, durable and effective to prevent water, ice and air pollution erosion and damage;

3, durable and effective to prevent sewage infiltration, dust adhesion, to keep the treated stone surface clean;

4, long-lasting inhibit the growth of mold, moss, macula;

5, with 100% air permeability, keep the original air permeability of the building material;

6, improve the heat insulation performance, with anti-ultraviolet performance, protect the stone surface color, prevent fading;

7, with self-cleaning, self-cleaning ability, strong wind, rain can clean the treated surface dust, with high pressure water rinse, will not destroy the surface effect;

8, effectively prevent edible oil, blue and black ink, juice, cola, coffee, tea, soy sauce, red wine and other colored water pollution infiltration pollution, easy maintenance and clean.Maintains the natural color appearance and air permeability of the substrate.

All the fire board stone are afraid of acid and alkali, will make the fire board yellow, the fire board surface is eroded, alkali will also make the fire board caused by crystal peeling, so that the fire board surface gloss lost.Cleaning agent with neutral pH value should be used. Only mild soap and water are needed for daily cleaning of fire board.

It is necessary to keep ventilation and dry. The fire board is afraid that the environmental humidity is too large. The water vapor will produce hydration, hydrolysis and carbonation on the stone, resulting in water spots, bleaching, weathering, denudation, rust yellow and other lesions.

The surface of burning board can not cover carpet for a long time, otherwise stone material will be too heavy because of moisture, water content increases to produce pathological changes, such as laid carpet or piled up sundries, need to change often.Once there is oil, tea, coffee and other poured on the stone must be immediately clean, to prevent infiltration of stone pores.All stone materials have natural pores, if not timely treatment of dirt will be easy to penetrate into the stone interior, the formation of nasty stains.