How to use the marble wave line?

Stone wave line, also known as the stone waveguide line or lace and yarn and so on, belongs to a decorative decorative lines, its width will change according to the different areas used.Generally in the floor decoration lines will add some of its color and the ground is not quite the same as the stone lines for decoration, in order to increase the design effect of the entire home environment.

Where is the main application of stone wave line?

Wave hits a line to basically use in sitting room or corridor porch the periphery of the ground such as.It is the decorative line around the wall edge of the ground that lays stone material commonly;The width depends on the specific situation.The color is generally different from the stone color, mainly dark;In contrast to the color difference of the stone, the lines with different colors from the whole floor are added to increase the design effect.

In the process of interior decoration, the wave line is mainly to further decorate the ground, make the living room ground more rich in changes, look to have a special artistic charm of some lines, full of beauty.

Wave hit line is equivalent to the wall of the kicking line, but the wall is put down to become the ground.Wave hits a line basically is to make sitting room ground more abound change, look a few lines that have artistic lasting appeal.

There is no fixed specification for the size of the wave line. If it is used in large quantities, it can be customized according to its specific use needs.The most common specifications on the market are 100mm, 130mm, 150mm and 200mm.In the purchase of the beater, should be based on the size of the room to choose the beater specifications.

Selecting the size of the wave line should consider the size of the space used.If the room is large, then you can choose the larger specifications of the wave line;The room space is small, use smaller specifications of the wave line.

This is because the wave line is to decorate the environment, emphasizing the sense of space.If its specifications do not match the size of the room, it will appear strange and lose beauty.

Packing standard of dialing line

1. The width of the ground wave line is generally 20-180mm, and it should be narrow rather than wide;

2, dark wave line is generally not beside the wall, in order to achieve the three-dimensional effect of suspension;

3. The seam of the wave line is consistent with the seam of the stone, and the corner is splicing at 45°.

Ground diamond - shaped shop paste parquet shop paste method

First of all, find out the center of the diamond diagram frame longitudinal and horizontal, put the "cross" line, with the size of the brick to calculate a row of stone is singular or even.

If it is singular, the middle stone is placed in the center of the crosshead and divided equally between the left and right.If the number is even, in the left and right of the crosshead, and then continue to spread to the edge of the picture frame, the two long edges of the picture frame must be connected with half or the whole stone.

If the size of the stone does not match with the space, you can design the size of the picture frame first, and then use the Pythagorean theorem to calculate the length of the side of the stone in the picture frame, and modify the brick processing.