Precautions for waxing and polishing of stone maintenance
Oct 13, 2020
1.pay special attention to waxes containing pigments that cause stone pollution
Because the stone has fine pores, it will absorb the pigment in the wax water, causing the pollution of the stone surface. Therefore, when choosing wax water, it is necessary to use wax water without adding pigments as much as possible, or first make sure that the stone surface has the ability to prevent pollution.
2.Avoid prolonged waxing causing yellowing of stone
There are many kinds of wax water, and it is difficult for consumers to fully understand its characteristics and quality and use it correctly. Some wax water contains unsaturated hydrocarbons, too long in the air will cause yellowing and cause stone pollution. Therefore, pay attention to the time when using wax water to avoid oxidation caused by too long time.
3.Pay attention to the polishing order
The polishing sequence should be polished from the inside to the outside and from left to right to avoid leaving dead corners.
4.Avoid the difference between mixing and confusing agent and wax,
The curing agent is a polymer coating material, which forms a protective film in the stone trader, which can effectively protect the stone from pollution; while the waxing is to increase the gloss of the stone. Some people mix the two to enhance the double effect, but the result is certain It would be counterproductive.
Waxing is a good way to maintain the stone, but the care cycle should be reasonable. Too frequent waxing will hinder the permeability of the stone. Only regular waxing can maintain the gloss of the stone.
