Small details of installation of washbasin
Jul 17, 2021
1, Rust
Washing basin installation method, mainly with Angle iron, welded into the frame, or custom iron frame, in the wall or ground to find a support point for fixing.The Angle iron itself can be prevented from rusting by means of spraying paint and galvanizing.
Small details of rust prevention:
(1) Welding point: the welding point destroys the protective layer of the surface of the Angle iron, and it will rust when it meets water, but it will generally be ignored here.
(2) Drilling: find the fixing point, the screw hole, the hole drilled by the electric drill on the Angle iron, will rust, this detail should also be protected.
2. Strengthen support
Want to disperse the bearing of stone material of lavabo as far as possible, can add two Angle iron below mesa.
3, Close to do a good job
Washbasin and basin joints, water and wall joints, to do a good job of closing the work.The best choice is to use plastic steel mud, the second available glass glue, close the joint place.Standard: dense and uniform.
4, Protection to do a good job
Washing table, cannot use alone water-based protective agent.The compound water-based protective agent should be used first, and then the high permeability fluorosilane protective agent should be used as superposition protective agent.Before brushing, ensure that the stone is clean and dry.Brush standard: sufficient amount, even, health more than 24 hours, 7 days is the best.
