Stone big board shooting skills

There is a problem of reflected light when photographing stone smooth large plate, which seriously affects the performance of stone color and overall grain. Some methods can be adopted to improve this situation.

Methods

1, The aperture should be small.Aperture values of 9-10 are the best. The smaller the aperture, the greater the depth of field and the clearer the area.

2, Focus to be accurate.At least 2-3 to focus on the larger difference of the board, position, can aim at more than seven.

3, Good light, light to accurate.The best time for outdoor shooting is between 9-11 am and 3-5 PM. Clouds are best on sunny days and diffuse light is best.Pay attention to adjust the Angle of the board to avoid direct sunlight.Focus on the main body of the board.It is recommended to use ISO100, ISO200 or ISO400.

4. The composition should be full and the position should be positive.Make the whole board as far as possible to fill the scenic area, especially when taking big board photos, to make the lens is facing the center of the board surface.Most cameras take a picture that is a little larger than the image seen through the viewfinder.

5. Pay attention to the mirror image on the board. When taking pictures, pay attention to the shadow of the objects behind the camera on the board.Such as crane, figure and so on.It is recommended to use a 2-second selfie stop, with the photographer leaving the camera after the shutter is pressed.

6. When the light is strong or weak, it is suggested to try to take several photos of the nearby apertures to ensure that there are available photos. It is troublesome for the masters to hang the plates to avoid repeated work.

7. Before shooting, ensure that the supporting battery, mirror wipe paper, lens, data storage card are in place, and make full preparations to avoid wasting time.