The difference between waxing and crystallization of natural stone

Stone floor is an essential material for modern decoration, especially natural stone is favored by consumers for its natural and beautiful characteristics. However, almost all natural stones will be scratched to varying degrees after a period of time, no matter how carefully they are used, and gradually lose their luster, which greatly affects the original appearance of the stone surface. Replacement or renovation costs a lot. If the ground damage is not particularly serious, the above measures should not be adopted.

      As the first generation stone care technology, wax is still widely used. This technology relies on low-molecular-weight plastic materials with water capacity to form a covering layer on the surface of the stone to protect the substrate. However, the hardness is low and the color is easy to change. It is necessary to polish and replenish the wax frequently, which consumes huge resources. In addition, the black waxing pad containing alloy sand is used in each waxing process, which seriously damages the stone surface, and the high-solvent and strong alkaline waxing water It penetrates into the stone to form cracks. With the development of new technologies, the first generation of technologies will be used less.

    Crystallization procedures for marble and granite

    Material: Stone high-gloss mirror reconstituted powder

    Function: Used for hard treatment of marble mirror surface, protect the stone surface from general scratches, maintain bright mirror surface, waterproof, anti-corrosion, and easier to care than waxing.

    This product is used for wet operation to recreate the high-gloss crystal surface of the stone in the shortest time, and is used to treat the surface of the stone that has lost its luster due to wear and other reasons.

characteristic:

    1) No stone surface scratches caused by steel wool

    2) Will not discolor the stone surface or leave yellow rust

    3) The stone surface is as bright as water, with a sense of hierarchy

    4) Low cost, time saving and labor saving

    5) It has the functions of preventing stains from penetrating into the inner layer of the stone, enhancing anti-wear and scratch resistance, etc.

     operating:

    1) Use a scrubber to clean the surface of the marble thoroughly

    2) Adjust the crystalline powder into a paste with pure water and apply it on the polishing pad.

    3) Use the 175 rpm floor scrubber to load 45KG to start grinding, and keep the ground moist during the operation.

    4) When the surface of the marble has formed a high-gloss crystal surface, use a water suction machine to absorb the remaining paste on the ground.

    5) Soak up the water.

    6) Polish with a polishing pad to make the ground completely dry and bright as a mirror. Comparison of crystallization and waxing.