The prospect of prolonging the service life of stone is huge

During the use of the stone saw machine, there should be a strict maintenance system.

1. Oil injection and oil change must be strictly in accordance with the lubrication requirements.

2. Regularly check whether various fasteners are loose and ensure that they are fastened.

3. When replacing the diamond circular saw, the end face runout of the saw blade should be detected. The new saw blade should not exceed 0.8mm, and the rewelded saw blade should not exceed 1.5mm.

4. Check whether the tightness of the triangle belt is moderate, whether there is skid phenomenon and whether it is aging.It should be adjusted or replaced sometimes.

5. Check whether the central lubricating oil road is unblocked.

6. Check the electrical components in the control cabinet frequently, whether the wiring screw is loose and whether the action is sensitive.

7. Whether the center of gravity is correct and stable when cutting the raw material, the bottom of the raw material must be left with 10 ~ 40mm.

8, check the headstock whether there is leakage, if found sometimes should immediately find out the reason, take measures, and replace the oil.

9. Check whether the electrical appliances are safely grounded.

10. Check whether the clearance of each moving guide is appropriate.