The thicker the quartz, the better?

Now the application of architectural decoration stone quartz stone is more widely, quartz stone is mainly made of quartz sand and resin die-casting artificial stone plate.The content of quartz sand shall not be less than 90% of the quartz stone manufacturers known as quartz stone, quartz stone plate rich in color, natural texture, and environmental protection, is the best substitute for natural stone in the current building decoration.

Now quartz stone sales market variety, but most of the thickness is 15mm, but the thickness of 20mm and 30mm also have.May be a lot of people mistakenly believe that nature is the thicker the better quality, use will be more durable.In fact, not so, generally speaking, thickness is not the only standard to judge its quality.Because its thickness will vary according to the range of use.

The most common thing we hear is that quartz stone is made of 90% quartz sand and 7% resin. What is the remaining 3%?

In fact, titanium dioxide, toner, curing agent and accelerator.If the quality of raw materials all pass the standard, coupled with scientific ratio, strict production process, product quality can be guaranteed.The corresponding proportion of uncoordinated, inferior raw materials will lead to the decline of finished product quality.The influence of production equipment on quality is also very important. The vacuum value before pressing should reach -99 or more to avoid bubbles in the plate.The pressing pressure should not be less than 50 tons, so that the density of the plate can reach the required value of 2.6g/ m3, and the water absorption of the finished plate should not exceed 0.02%.

In fact, the thickness of quartz stone is not the standard for judging quality.Due to the different range of use, there may be certain requirements for thickness.Say ambry mesa for example, ambry mesa can be divided into pad type and pad plate type, choose pad plate type to use 15mm is optimal, the need that chooses pad plate type is in the ground stick to connect stiffen (backplane).And the use of the ground most choose 20mm or 30mm plate, wall most choose thin.In fact, there is no good and bad, only suitable and not suitable.The scope of application is different, so the requirements of products are different.