Treatment method of terrazzo crystal surface
Dec 31, 2020
1. Use astone refurbishment machine to grind from 50# to 1000#. Clean up. Make sure the stone surface is clean and dry.
2. Using 1# steel wool, coil the steel wool on the white pad, and then paste the white pad on the dial of the crystal surface machine or the refurbished disk.
3. Spray a small amount of MS-6 terrazzo crystal surface agent (about 10-15 grams) on the ground of 1-2 square meters, and then grind it evenly with a crystal surface machine. Grind it back and forth until it is bright and dry.
4. Repeat the above procedure to obtain a thicker, high-brightness mirror layer.
