What should be paid attention to when processing snowflake white marble?

Snowflake white marble has the characteristics of snow white and easy to break. The processing method in the processing process is relatively complicated. However, the decoration and stone processing market is mixed, and problems in any link of stone material selection, processing, and installation will seriously affect The final sensory effect.

(1) Screening of blocks and slabs
Snowflake White has different background colors, varied textures, and different styles. Therefore, it is necessary to select enough blocks with similar background colors and texture styles before the blocks are opened. pick).

Because if it is found that there are not enough blocks of the same style or background color at the end of processing, it will take a lot of time, manpower and material resources to find suitable blocks in the market, and it is likely to be forced to purchase at a high price due to the small purchase volume.
Because if it is found that there are not enough blocks of the same style or background color at the end of processing, it will take a lot of time, manpower and material resources to find suitable blocks in the market, and it is likely to be forced to purchase at a high price due to the small purchase volume.
What needs to be noted here is that it is not possible to measure whether the blocks are sufficient from the area alone. It is necessary to check the size of the plates in the typesetting diagram, so as to accurately calculate the stone material yield, so as to be foolproof. After ensuring that the blocks are sufficient, compare the background color and texture style of the blocks to be used by spraying water. If there is any deviation, it must be replaced to ensure the final decorative effect.
The process of stone from blocks to slabs is similar to gambling jade. On the surface, blocks with good background color and texture may have cracks and stains in the middle of the large slabs.
Therefore, in addition to arranging experienced personnel when selecting blocks, it is also necessary to conduct a second selection of the large slabs that have been opened. For the large slabs with defects, either do not use them, or remove the defective parts before proceeding. use.
(2) Other matters needing attention in the process of snowflake white processing
Water will be used in all aspects of stone processing. In order to save costs and meet the relevant requirements of environmental protection laws and regulations, general stone manufacturers will use recycled water after precipitation.
The stone chemicals used in all aspects of stone processing will flow into the circulating water (such as stone dyes, stone polishing wax, etc.).

These chemicals will not have a noticeable effect on conventional black or beige stone. But for snowflake white, which is white and soft calcareous stone, it is very likely to cause irreversible serious pollution. Therefore, the water used in the process of processing snow white must be tap water.
The snowflake white stone is white all over, containing countless fine crystal particles, and the surface gloss is extremely high. Once a fracture occurs, no matter how it is repaired at the construction site, there will be traces of the fracture, and if the on-site installation uses a wet paste process for construction, Snowflake White is very prone to alkali return at the fracture.

Therefore, after Snowflake White is cut from blocks into large slabs, it needs to be repaired, polished and backed immediately to reduce the chance of Snowflake White breaking during processing and installation.
The texture of Snowflake White is relatively soft, and the probability of contamination after installation is high. Therefore, Snowflake White must be protected on six sides before leaving the factory.