White stone care of nine matters needing attention

1, The white stone before filling glue to do protection, the transverse and vertical surface of the seam should do saturation protection, and ensure enough health period.

2, white stone can not easily scrape glue, glue oil in the glue is very easy to penetrate into the white stone surface to form an ugly shadow.

3, white stone as far as possible to choose white pad or good softness stainless steel wire wool to do crystallization, if the use of ordinary steel wire wool to do crystallization and pharmaceutical crystallization, pharmaceutical must be put less and more grinding, clean agents, and then fine steel wire wool to clean all potion marks on the surface of the stone, to avoid the ground yellow.

4. Do not place all kinds of metal physical bodies on the white stone ground. After crystallization, clean up all the steel wire and cotton debris.

5, white stone to clean the stain of the seam, when cutting the seam, the iron piece of the seam can not touch the seam, otherwise there will be gray pig iron left on the white stone, the same phenomenon, with the glue gray knife to clear the seam will also cause the seam gray.

6, white stone material should choose high quality protective agent with high solid content, in order to resist the glue oil exudated at high temperature in the curing process of marble glue.

7, white stone to high degree grinding, and brushing repeatedly protection, do chemical crystallization to put less and more grinding, so that the crystal layer superposition, in order to make the ideal luminosity.

8, poor quality of dry grinding plate grinding white stone, will cause the white stone surface yellow, poor quality of dry grinding plate in the process of dry grinding temperature rises sharply, the high temperature generated by the dry grinding plate binder softening and attached to the stone surface caused by yellow.

9, besmear any product on the white stone, must go through the weather resistance and yellowing test, inferior cloud paraffin wax, brightening agent, mercerizing agent and so on will cause the white stone yellowing.

White kind of stone material is not difficult to do, understand the special type of white stone material, pay attention to details, choose high quality products and reasonable construction technology can make the ideal result.