Window sill stone decoration had better avoid construction in winter
Feb 23, 2021
Window sill stone installation points careful construction
Window sill stone selection, into the installation of the construction link.Whether the details are handled in place during the installation determines the final installation effect. Therefore, when the construction is installed, we should pay attention to some burial points to ensure nothing goes wrong.
1, The window sill stone installation should be before the wall treatment
When the house is decorated, the windowsill board should be installed before the windowsill wall decoration, so that the gap on both sides can be made up by scraping putty, but the protection of the windowsill stone should be made well when the wall is processed.If you can only install the windowsill stone after the wall is processed, make sure that the gap on both sides of the wall is not more than 2 mm.
2. Cement should not be used at the joint of windowsill installation
When installing the joint to use glass glue, do not use cement pointing, if the stone joint has a Xu mouth, and then fill with cement, it will be more obvious.
3. Window sill stone should not be processed in winter
Stone processing is best to avoid winter, because the stone processing is basically in the open air, cold sticky marble quality is not guaranteed, sticky easy to fall down, and the cold sticky marble seam is big, not good looking.
4, There is a back net stone is not suitable for narrow window sill
Note that the stone with the back net is not suitable for the narrow window sill, and it is easy to break. Although it can be treated by adhesive grinding protection and other means, the effect is difficult to ensure.
5. Pay attention to maintenance after installation
After the windowsill stone is installed, it needs proper maintenance.Pay attention to not arbitrary waxing, wax on the market basically contain acid and alkali substances, will block stone pores, but also easy to be stained with dust to form wax scale, and wax mostly contains ammonia substances, will cause adverse effects on the human body and the environment;Stone surface after polishing processing, as far as possible to avoid hard objects scratch;In addition, the stone has a certain air permeability, do not be covered for a long time.
