Check several cleaning methods of outdoor ground stone
Aug 02, 2021
Outdoor stone, however, will be affected by many factors, and the surface is usually processed into anti-skid surface, uneven, easy to hide dirt, and care is more complex.It is easy to be polluted by cement residue, paint, oil pollution, wheel marks, vehicle lubricating oil dripping, gum pollution and other pollution left in stone installation and construction.The cleaning and protection of these pollutants is the main content of outdoor stone care.
The cleaning method of outdoor ground stone for anti-skid ground stone pollution, the traditional cleaning methods used in daily cleaning have several.
1,High pressure water gun cleaning using high pressure water gun cleaning can remove the dust on the stone surface and relatively easy to clean the pollutants, but high pressure water gun cleaning waste precious water resources, and the splash when washing, easy to pollute other parts, cleaning is not thorough.
2, Single brush machine nylon brush plate cleaning using a single brush machine and nylon brush plate cleaning is the current price of the general cleaning method, single brush machine itself is the structural characteristics of the light pollution can be cleaned, stone surface pollution is not thorough cleaning.
3, Chemical cleaning agent cleaning chemical cleaning agent can clean off more serious stone pollution, but it will cause damage to the flowers, railings and other decorations around the stone.If the use of improper stone will also cause new lesions, affecting the decorative effect of stone.
4, Grinding comprehensive cleaning grinding cleaning is a newly developed stone surface cleaning method, it with other chemical cleaning stone can achieve a thorough cleaning of the stone surface effect.
1) The construction method of grinding cleaning
(1) Use the 36# or 60# grinding brush for grinding and cleaning.The sewage should be sucked away by the suction machine, and the water should be completely absorbed, so that the sewage can not enter the stone.
(2) The use of stone professional oil removal paste stone surface oil removal construction.The removal rate of oil spot is above 90%, and it can be cleaned many times when necessary.
(3) Use strong stone cleaning agent or professional hammer to remove the cement residue on the stone surface.The principle of using flower hammer is to impact the cement residue with flower hammer, so that the cement residue loose and achieve the purpose of removal.
(4) check whether there is other pollution on the stone surface, and choose the corresponding stone special treatment agent for treatment, can use a variety of cleaning agents for cleaning, large drug control cleaning agent usage, prevent cleaning agent pollution stone.
(5) Use 120# grinding brush for grinding and cleaning, and use water absorption machine to clean the sewage, no residual sewage.
(6) check the treatment of pollutants on the stone surface, if necessary, should use special cleaning agent for stone cleaning.
(7) Use 180# grinding brush for grinding and cleaning, and use water absorption machine to clean the sewage, no residual sewage.
(8) Use 240# grinding brush for grinding and cleaning, and use water absorption machine to clean the sewage, no residual sewage.
(9) The stone surface is fully dry to prepare for the next construction.
2) The advantages of grinding and cleaning
(1) Green environmental protection: due to the less use of chemical agents, so the pollution damage to the environment and green plants is very little.
(2) Clean thoroughly: the use of grinding brush can make the pollution on the stone surface be completely removed.
(3) Saving resources: the comprehensive cleaning of grinding can save more than 50% water than the high-pressure water gun cleaning, and the water consumption is equivalent to that of the single brush machine cleaning.
(4) stone safety: due to the less use of chemical cleaning agent, so the long-term use of stone safety is guaranteed.
3) Problems that should be paid attention to during construction
(1) The number of grinding brush should be selected according to the variety of stone and the shape of the finishing.
(2) The selection of several grinding brushes should be based on the specific requirements of users, the more times the use of grinding, the better the smoothness of the stone surface.
(3) In the removal of solid pollutants such as cement residue, the choice of flower hammer should be selected according to the shape of the stone face.The selection of stone protection agent should be carried out sample test, verify the protection effect and reach the user's satisfaction, before the construction of large area.
