Quartz stone mesa processing to the installation of matters needing attention

1, Quartz stone is generally taken splicing installation, everyone in the choice of splicing position, because try to avoid the corner and furnace mouth, this is because quartz stone has the characteristics of thermal expansion and contraction, if close to the fire or corner, there may be cracking.

2, Everyone in the design of the table corner, should fully consider the stress concentration, resulting in cracking at the corner of the table, so in the processing should be all corners to keep the radius of the arc Angle of 2.5cm or more.

3, The opening corner should keep the radius of more than 2.5cm rounded corner, four corners must be used to do reinforcement with homogeneous plate plate, there should be a certain space between the hearth and the table, the space distance is 0.4-0.6cm, around the opening add heat insulation cloth and tin platinization paper for heat insulation protection measures.

4, Design of hearth, when opening a mesa hole position should be from mesa edge should be greater than or equal to 8 cm, prevent Taiwan faces a craze, pulling in the hearth, use first hole saws cutting machine or curve, reoccupy gong machine or hand mill grind the trimming, smooth effect, the four basic uniform circle radius of solitary, because of the hole curve saw, cutting machine, The four edges of the cut hole are serrated to the residual crack, which is easy to cause the crack at the opening.

5, The design of the table should take into account the stairs, elevators, doors and other transportation channels on the size of the table, the joint should meet the joint requirements mentioned above.

After everything is ready, you can start to install quartz stone installation. Quartz stone installation quality is directly related to the beauty and service life of the table, so it can not be ignored. Here we come to understand the quartz stone table top installation precautions:

1, Due to the high hardness and density of quartz stone mesa, so the processing technology requirements are higher. Therefore, quartz stone mesa installation, should contact professional quartz stone installation master, and use professional tools for installation, must not be blindly installed, so as not to cause.

2, Before installation, check the flatness of the cabinet, check whether the size of the quartz stone mesa is fully matched with the cabinet. If errors occur, it is necessary to rework the quartz stone countertops or trim the cabinets.

3. When measuring the depth of the cabinet, a size of 4cm should be reserved for the table so as to facilitate the installation of the lower hanging edge strip.

4, In the splicing of some super long table (such as L type table), in order to ensure the splicing table flatness and joint tightness, it is recommended to use A strong fixed clip (A clip, F clip) to fix the quartz stone plate. In addition, when sticking the hanging bar, it is necessary to use a strong fixing clip to ensure the perfect combination of mesa splicing and mesa and the gap between the hanging bar splicing.

5, There should be a certain distance between the quartz stone table and the wall (usually 3mm to 5mm), after the installation is completed, the glass glue should be evenly played in the gap between the table and the wall.

6, In the table installation, as far as possible to avoid a large range of cutting and opening of quartz stone in the construction site, on the one hand, in order to eliminate the cutting dust pollution of the construction site, on the other hand, in order to prevent cutting is not allowed to cause errors.