Stone craft three-plate axe - cut, stick, grind

Stone as a traditional industry, due to the relatively short time into home decoration, more opportunities for tooling, many consumers and even dealers are too little knowledge of stone in fact, stone processing is nothing more than three axe.

Stone processing technology is mainly composed of three parts: cutting, sticking, grinding, any stone products, are inseparablefrom these three parts, as long as the eye to observe, touch with the hand, heart to feel, you will become a stone expert.
1. Bridge cutting, cutting stone, pay attention to the accuracy and avoid bad patterns or cracks, accuracy, because now most of the bridge is cut with infrared, as long as the machine does not break down, the master is a little more careful, basically the error will not exceed 0.5 mm, the consumer can rest assured.The master of a master level, want to have aesthetic taste above all, besides the finished product that should know oneself cut to come out single good looking, still have to think about the grain when whole wall or whole stone material ground is cut to come out again is stitching good-looking, whether join pleasing to the eye.

On the basis that gives material rate higher to let stone material, the effect is better, should know to put a few blemishes in a few inconspicuous place, for example the place that sofa puts, for example the place that TV ark puts again, stair bottom, wall foot...And so on not obvious place, so to make the effect, the cost performance is high.

2. Bonding, in ancient times, there is no glue, so the ancient stone is done with thick material, more thick and spread for a long time.Modern is to save material, it is to paste a modelling with plank mostly, so derivative paste this craft.

Paste, fastidious is to do seamless docking as far as possible, there is a texture connection is smooth, let a person look at it is the whole material to make.In order to do this, the first thing is to choose the stone cutting material and cut accurately.Then you have to adjust the color of the glue, with marble glue plus a variety of color powder, the glue and stone background color closer, seam, it looks like there is no seam.Secondly, the flatness of the operation table in the pasting process and the Angle that the master controls when stitching the board together are also the key to making the seam exist or not exist.

3 Mill, including water mill and coarse grinding, coarse grinding, is out of shape, then the master with a portable mill to the unnecessary grinding, because it is dry grinding, grinding process dust rolling, but the master at the risk of life for our beautiful home to make cabbage price contribution.

After the rough grinding, the next shift of workers came in, that is, the water mill. Although the water mill is free of the dust interference of the dry mill, the water mill masters soak their hands in water all day, and allergies and corrosion often make their hands painful.After nearly ten different precision grinding head rotation, a flash of stone products is basically completed.