DIY Kitchen Granite Countertops Steps

step 1  Visit the supplier, choose your granite countertop, the key is to find a company that provides granite.

Step 2  Create a template. Use a tape measure to measure the surface area, and then use a poster board or other similar material to create a template. You may have to glue these pieces together. This template can be used to create your workbench.

Step 3  Transfer template shape and cut from granite slab .

Step 4  Remove the old sink and pipe from the countertop/cabinet, loosen and pry open the back plate of the countertop for removal.

Step 5  After removing the screws, caulking or glue, disassemble the work surface; after closing the appropriate circuit, disassemble the appliance.

Step 6  Install granite countertops and backsplash.