How Is The Culture Stone Attached?
Dec 14, 2020
1. Wall cleaning
Clean up the rubbish and dust attached to the foundation. When using an existing wall in a modification project, the paint, wallpaper, adhesive, oil, etc. should be washed out.
2,Layout design
Considering the balance of the color tone, the approximate bricks are not concentrated, and the size deviation of the bricks is adjusted by the joint width.
3, Apply adhesive
Use the cement spatula with the comb hole to apply the adhesive for interior decoration to the wall. Apply about 5MM thickness. Before tiling, in order to prevent the adhesive from drying too quickly, the adhesive must be smeared over 1M2.
4. Paste cultural stones
When pasting the cultural stone, fully press the brick until the adhesive is exposed from the sides of the brick. Where there is a corner, start construction at the corner.
5. Seam processing
Seam processing: Press the adhesive with a wet brush to adjust the depth of the seam. At this time, if a large amount of water is used, it will cause the shrinkage, so pay attention to it. After the 1M2 bricks are pasted, the joints are processed. Please repeat the tasks 3, 4, and 5 until they are all posted.
