How To Refurbish Stone

1. Repair damaged and middle seam glue

First, repair the damaged surface of the stone, and fill in the damaged place with marble glue close to the color of the stone. Then use a special stone slitting machine to neatly cut and slit the center seam of the original stone installation, so that the width of the gap becomes almost the same, and then fill the damaged place with marble glue close to the color of the stone.

2. Polishing the cutting position

Using a stone refurbishing machine with a special cutting edge grinding sheet to carefully polish the cutting edge to make it a flat surface with the stone.

3, grinding and polishing

Using a special stone polishing machine, the stone water-grinding sheet is used to grind the stone from coarse to fine, so that the surface of the stone is restored to its previous brightness and smoothness.

4, crystallization treatment

Using stone crystal powder and crystal medicament with stone refurbishment machine polishing, the stone and crystal powder will undergo a comprehensive physical and chemical reaction under the action of high temperature under the weight of grinding, forming a dense and hard crystal protective layer. After crystallization, it can enhance the color and brightness, and can also achieve anti-skid, waterproof, oil-proof and other effects.