Three Ways To Install Marble Wall

Using marble to decorate the wall can indeed create a more noble and glamorous decoration style, but you must pay attention to the method of marble on the wall, otherwise, due to gravity, the aging of the adhesive will easily cause the marble to fall off, causing danger. There are generally three ways to decorate marble walls:

The first is dry hanging. This method is to first fix it on the wall with bolts, then slot a piece of stone, fix the stone with a T-shaped frame, and then fix the T-shaped frame and bolts together. This kind of marble There is a certain distance between the wall and the wall itself, but it has good fixation. So if the location of the bathroom is sufficient, this method is the first to stick to the wall.

The second is wet pasting. A layer of steel mesh must be laid on the wall first, and then concrete wet pasting. This method has a better bonding effect, but it is relatively more troublesome.

The third method is relatively simple, which is to paste directly. Generally divided into point paste and surface paste. The surface pasting method is suitable for thin stone, the thickness is less than 8mm, and the weight is similar to that of wall tiles, and it can be pasted with special mortar. Point pasting is to use special glue for stone, the range of points cannot be greater than 25cm, the amount of points cannot be less than 3-4cm, and the thickness of the glue is more than 0.5cm. This method is used for thicker stones. However, the direct pasting method is not suitable for toilets, because the toilets are mostly light-weight walls with large deformation, and the toilets are often wet. Over time, the glue is prone to aging and accidents are prone to occur.